JDB-N embedded graphite copper sleeve Product parameters

Material properties:

1. It can be used for a long time without maintenance.

2. Designed for high static and dynamic loads.

3. It has low and stable friction factor and no "sticking" phenomenon.

4. Dust resistance, corrosion resistance, impact resistance and edge load resistance.

5. Metal substrates have good shock absorption ability

6. Can be used in a wide temperature range

7. Suitable for the occasions of frequent start-up such as reciprocating, rotating and swinging and difficult to form oil film.

Material structure:

JDB-N embedded graphite copper sleeve uses various copper alloys as basic materials. According to the working conditions, holes are machined and filled with solid lubricants in the working face according to a certain proportion. All kinds of copper alloy materials provide a more suitable load-bearing capacity, while solid lubricants can form a lower friction pair.

Highlighting advantages:

1. Enhance the strength of copper sleeve, effectively prolong its normal service life;

2. Reduce the cost of graphite and other auxiliary materials, while improving the efficiency of lubricants;

3. Reducing the loss of lubricating oil is conducive to reducing waste and environmental protection.

4. Because the process of this product is more precise, it is beneficial to use in some special occasions.

Anhui IFAG Hardware Accessories Technology Co., Ltd. provides you with:oilless bearings, sliding bearing, self-lubricating bearings, composite bearings;

Double metal bushings should be noted when selecting anti-rust oil

The bimetal bushing is a carbon steel matrix. The surface of the bronze powder has low friction coefficient, good wear resistance, long service life of the sliding bearing and good anti-seizure performance. Therefore, when selecting anti-rust oil, attention should be paid to:

1. Corrosion resistance of carbon steel;

2. Anti-rust performance of copper alloy;

3. Lubrication performance.

When selecting, it is recommended to apply two kinds of metal anti-rust oil (the traditional anti-rust oil is basically only for carbon steel), and the anti-rust oil should have certain lubricating properties. One is to consider the applicable type of multi-metal lubrication rust-proof oil, and the second is to buy a composite oil-soluble corrosion inhibitor and engine oil, which can be used after thorough mixing.