Metal plastic polymer
SF-1P oilless lubrication bearing (reciprocating type)
Material organization
1. The copper/tin plating layer is 0.002mm, which makes it have
better corrosion resistance.
2. The copper powder layer is 0.20~0.35mm, which has good
load-bearing capacity and wear resistance. Good thermal
conductivity can transfer the heat generated during the operation
of the bearing. The composite material can penetrate into the gap
of the copper powder ball to improve the bonding strength.
3. PTFE / fluororesin layer thickness 0.05 ~ 0.10mm, dry friction,
can be reworked to obtain a higher tolerance level.
Technical Parameters
| Bearer | Static bearing | 250N/mm2 | Operating temperature | -195℃~+280℃ |
| Friction factor | 0.03~0.20 |
| Bearer | 140N/mm2 |
| High speed | Dry friction | 2m/s | Thermal Conductivity | 42W(m*K)-1 |
| Fluid lubrication | >2m/s |
| PV (dry) | short time | 3.6N/mm2*m/3 | Thermal expansion coefficient | 11*10-8*K-1 |
| continuous | 1.8N/mm2*m/3 |
typical application
Due to the thick PTFE lubricating layer, SF-1P oilless lubricating
bearings (reciprocating type) are mainly used in precision parts
such as automobile belt tensioners, pulleys, solenoid valves, air
conditioner compressors, and hydraulic pumps．
Oilless sliding bearing refers to a special bearing
Oil-free bearings (oil-free plain bearings) are used for plain
bearings. Oil-free lubricated bearings are designed for
self-lubricating, oil-free bearings, smooth operation, reliable,
and noise-free. Liquid lubrication conditions, separated from the
lubricant does not directly contact the sliding surface, you can
greatly reduce friction loss and surface wear, this film also has a
certain degree of impact absorption.
But greater starting friction. The shaft portion of the bearing is
called the shaft diameter portion, called the bush and the shaft
diameter go together. In order to improve the friction bearing
surface properties of the friction material of the inner surface
layer of the casting, it is called a bearing lining.
The materials for the bearings and bearing linings are collectively
referred to as bearing materials. Bearing applications typically
load conditions, maintenance and lubrication or difficult operating
areas at low speeds and weights.
About Us
Anhui IFAG Hardware Accessories Technology Co., Ltd. is a high-tech
enterprise specializing in R&D, production and sales of
self-lubricating bearings.
The company develops and innovates, continuously absorbs industry
specialties, introduces advanced equipment, adopts advanced
technology, and produces various model specifications. oilless
self-lubricating bearings, bushings, bushings, copper sleeves and
other products.
